Collector for ArcGIS (Windows) is unable to collect a point feature using a GNSS receiver

Collector for ArcGIS (Windows) is unable to collect a point feature using a GNSS receiver

ESRI Collector for ArcGIS on Windows offline may encounter the clock issue described at the following web page.

Using point averaging seems to be the easiest workaround at this time.
    • Related Articles

    • Adding GNSS Metadata Fields into Feature Class for AGOL and Collector This toolbox provides an quick method of adding the GNSS Metadata (receiver, lat, long, altitude, pdop) to a feature class to be used in collector.
    • R2 not being recognized in Collector for ArcGIS on Android

      After configuring the R2 receiver in Trimble Mobile Manager and setting the R2 as the location provider in Collector for ArcGIS, the Collector map displays a message the GPS location is not available. This is due to an issue with the firmware from ...
    • Obtaining Orthometric Heights with Trimble GNSS and Collector for ArcGIS

      Frontier tech video: Trimble Elevation Concepts for GIS blog: Trimble Orthometric Heights ...
    • R2 won't connect to Collector if it says Owner1

      This causes an issue with software’s like GNSS Status and Collector Classic and newest Collector for iOS not to recognize the R2’s.  Those software’s are looking for the serial number and the word Trimble.   See attachment
    • R1 USB Connection Issues on Windows 10

      If you are experiencing issues connecting a R1 receiver to a Windows 10 computer with the micro USB cord the issue could be that the device drivers are not updated. If after automatically updating the drivers in the device manager you are still ...