Obtaining Orthometric Heights with Trimble GNSS and Collector for ArcGIS

• Related Articles

• R2 not being recognized in Collector for ArcGIS on Android

  After configuring the R2 receiver in Trimble Mobile Manager and setting the R2 as the location provider in Collector for ArcGIS, the Collector map displays a message the GPS location is not available. This is due to an issue with the firmware from ...

• How to Configure and Use Trimble Catalyst with Collector for ArcGIS

• Collector for ArcGIS (Windows) is unable to collect a point feature using a GNSS receiver

  ESRI Collector for ArcGIS on Windows offline may encounter the clock issue described at the following web page. https://support.esri.com/en/technical-article/000018485 Using point averaging seems to be the easiest workaround at this time.

• Adding GNSS Metadata Fields into Feature Class for AGOL and Collector

   https://github.com/Esri/collector-tools/archive/master.zip This toolbox provides an quick method of adding the GNSS Metadata (receiver, lat, long, altitude, pdop) to a feature class to be used in collector.

• Non-WGS 84 Datums in ESRI ArcGIS for Windows Mobile and Trimble Positions

  The attached support note describes how to use a non-WGS 84 coordinate system with Trimble Positions for ArcGIS for Windows Mobile.