R1 5.44 firmware

• Related Articles

• R2 won't connect to Collector if it says Owner1

  This causes an issue with software’s like GNSS Status and Collector Classic and newest Collector for iOS not to recognize the R2’s.  Those software’s are looking for the serial number and the word Trimble.   See attachment

• Adding GNSS Metadata Fields into Feature Class for AGOL and Collector

   https://github.com/Esri/collector-tools/archive/master.zip This toolbox provides an quick method of adding the GNSS Metadata (receiver, lat, long, altitude, pdop) to a feature class to be used in collector.

• Collector for ArcGIS (Windows) is unable to collect a point feature using a GNSS receiver

  ESRI Collector for ArcGIS on Windows offline may encounter the clock issue described at the following web page. https://support.esri.com/en/technical-article/000018485 Using point averaging seems to be the easiest workaround at this time.

• Obtaining Orthometric Heights with Trimble GNSS and Collector for ArcGIS

  Frontier tech video: https://youtu.be/pVh5VXmJR3Q Trimble Elevation Concepts for GIS blog: https://community.trimble.com/community/find-answers/mapping-and-gis-solutions-community/blog/2020/04/04/elevation-concepts-for-gis Trimble Orthometric Heights ...

• R2 not being recognized in Collector for ArcGIS on Android

  After configuring the R2 receiver in Trimble Mobile Manager and setting the R2 as the location provider in Collector for ArcGIS, the Collector map displays a message the GPS location is not available. This is due to an issue with the firmware from ...