How to Configure and Use Trimble Catalyst with Collector for ArcGIS

• Related Articles

• R2 not being recognized in Collector for ArcGIS on Android

  After configuring the R2 receiver in Trimble Mobile Manager and setting the R2 as the location provider in Collector for ArcGIS, the Collector map displays a message the GPS location is not available. This is due to an issue with the firmware from ...

• Obtaining Orthometric Heights with Trimble GNSS and Collector for ArcGIS

  Frontier tech video: https://youtu.be/pVh5VXmJR3Q Trimble Elevation Concepts for GIS blog: https://community.trimble.com/community/find-answers/mapping-and-gis-solutions-community/blog/2020/04/04/elevation-concepts-for-gis Trimble Orthometric Heights ...

• Non-WGS 84 Datums in ESRI ArcGIS for Windows Mobile and Trimble Positions

  The attached support note describes how to use a non-WGS 84 coordinate system with Trimble Positions for ArcGIS for Windows Mobile.

• R1 with Android Videos

  Connect R1 to Android for use in Collector Classic: https://youtu.be/QQhkkq48NCg Connect R1 to Android for use in TerraFlex: https://youtu.be/etVr9epzp5Y Connect R1 to Android for use in Survey123: https://youtu.be/ATxP_YPRndU

• ArcGIS for Windows Mobile in Desktop 10.4, If Create Mobile Cache is greyed out

  If Create Mobile Cache is greyed out, this is most likely occurring because the Mobile GP tools are not installed. To get those installed, you need to install ArcGIS for Windows Mobile on the local machine. Unfortunately, Mobile is no longer ...