R1
Trimble R1 with Windows 10 Devices for Use in TerraFlex
https://www.youtube.com/watch?v=_J0a-iCDnQw&t=1s
R1 5.44 firmware
The new Trimble R1 firmware sets NMEA to output automatically. If you connect in GNSS Status and set the NMEA output manually, this will lower the buad rate and may cause your software to operate slower. Best practice would be to download the 5.44 ...
R1 with iOS Videos
Connect R1 to iOS for use in Collector: https://youtu.be/N6Hed3NZXUQ Connect R1 to iOS for use in TerraFlex: https://youtu.be/odhP_cVuLns Connect R1 to iOS for use in Survey123: https://youtu.be/bAUyVV0Gam0
R1 with Android Videos
Connect R1 to Android for use in Collector Classic: https://youtu.be/QQhkkq48NCg Connect R1 to Android for use in TerraFlex: https://youtu.be/etVr9epzp5Y Connect R1 to Android for use in Survey123: https://youtu.be/ATxP_YPRndU
R1 USB Connection Issues on Windows 10
If you are experiencing issues connecting a R1 receiver to a Windows 10 computer with the micro USB cord the issue could be that the device drivers are not updated. If after automatically updating the drivers in the device manager you are still ...
Connecting Trimble receivers through Bluetooth to a Windows Mobile Device.
The Trimble® R1 and R2 GNSS receivers can be connected via Bluetooth® to any Window Mobile device running Windows Mobile 6.5 or higher to obtain high accuracy data collection or for tablets and computer with no internal GPS. Attached is a support ...